Our cloud-based software is designed for easy integration, data reliability and optimized for immediate data accessibility.
Our cloud-based software is designed for easy integration, data reliability and optimized for immediate data accessibility. Oil Advantage inline sensors deliver oil condition monitoring data that corresponds with the ASTM standards for measurements of TAN, oxidation, and water contamination.
Use EngineWatch for maximum engine life and extended oil drain intervals. EngineWatch is compatible with all engine oil types and provides you with six oil condition monitoring parameters:
Oil contamination and degradation can lead to catastrophic failure of critical equipment components. MachineWatch monitors the condition of your gear oil and hydraulic oils, providing you data on:
Convenient Installation. Swap the oil drain plug with the Oil Advantage sensor which installs precisely into the oil pan/reservoir of the equipment to be monitored – no need for bypass pumping. A ruggedized cable runs from the Sensor Assembly to the DAU and can be installed at any convenient location within the equipment or nearby. Our sensor assembly, cables, and DAU are IP67 rated and designed to operate at ambient temperatures up to 80C so are suitable for mounting in any exterior environment.
Easy Availability. Our products run off 9V – 28V DC power and draw a maximum of 100mA. Two wires run from the DAU and can be connected to any suitable power source.
Access data a variety of ways.
Rely on any of our interface options including CAN, RS232, Modbus RTU, etc., to create a hard-wired connection between our device and your telematics box onboard the equipment being monitored.
Using any of our integrated wireless capabilities, including bluetooth, wifi, and cellular, transmit sensor data up to our dedicated cloud and then through an API to your cloud solution.
Access your custom configured dashboard anywhere and anytime using our integrated telematics and dedicated cloud solution. Our end-to-end solution is a seamless process from device installation to data accessibility and decision making.
EngineWatch and MachineWatch are designed to reduce the cost and complexity you experience with other solution providers. Our devices install directly to your existing oil reservoir, eliminating the need for additional plumbing or pumps.
The hardware component of our products is made with highly corrosion-resistant stainless steel, ruggedized cables, and IP67 (with an option of IP69) waterproof connections. Used under normal conditions, EngineWatch and MachineWatch will remain maintenance-free throughout the lifetime of your equipment. Under extreme conditions of soot, fuel, or water exposure, the sense element may need to be replaced during an oil change, at a minimal cost and in less than a minute.
Our proprietary technology eliminates the need for optical sensors and ensures clear and accurate data capture even in extreme operating conditions. We also provide data access through a variety of channels, helping you to choose the best option for your operation.
We save you installation time and cost. EngineWatch and MachineWatch are compatible with all oil types, require no bypass pump, and install in under 10 minutes.